LGSLIFTER LH55 5,5 TON 6,5 TON CRAWLER excavateur
Modèle: LH55 LH65
Charge de levage nominale: 5.5-6.5Tonne
Bucket capacity:0.21 m3
Max. Rayon de fouille:6128MM
Max. Profondeur de fouille:3808MM
Max. Hauteur de creusement:5499MM
- Descriptions de produits
1. Excavators can be divided into large excavators et small excavators from the rated load classification, and can be divided into wheeled excavators and crawler excavators from the use of the classification; Crawler excavators are also divided into steel tracks and rubber tracks
2. The common configuration of the excavator is a hydraulic hammer, tilting quick change bucket, etc.
3. The engine of the excavator can be configured with domestic engines and engines that comply with EU emissions and US EPA certification
4. Fully expand the field of view, increase the front window, side window and rear window to ensure a wide field of view, greatly reduce the blind area, safer and more efficient operation.
5. Increase the skylight glass, improve the upward visibility and increase ventilation, doors and Windows with tempered glass, to prevent direct sunlight shading;
6. Luxury interior cab, LCD panel, luxury seat.
Install air conditioning and warm air to ensure rapid indoor heating and coolingIntelligent operation and display
7. The electric throttle control system makes full use of the engine power, so that the machine always maintains the best efficiency and economy under different operating conditions.



- Spécifications du produit
Modèle | FD80 | FD100 | |
Charge de levage nominale | kg | 8000 | 1000 |
Distance du centre de chargement | MM | 600 | |
Hauteur de levage gratuite | MM | 200 | |
durée globale ( Avec Fork / sans fourche ) | MM | 5175/3955 | 5497/4277 |
Largeur | MM | 2245 | |
Hauteur de garde aérienne | MM | 2570 | |
Empattement | MM | 2800 | |
Déclaration minimale du sol | MM | 250 | |
Angle d'inclinaison du mât (avant / arrière) | % | 10° /12° | |
Tire non. (avant) | 9.00-20NHS | ||
Pneu no.(après) | 9.00-20NHS | ||
Rayon de tournage minimum (côté extérieur) | MM | 3755 | 4150 |
Largeur d'allée à angle droit minimum | MM | 5755 | 6010 |
Taille de la fourchette | MM | 1520x170x70 | 1520X175X85 |
vitesse de travail maximale(Charge complète / sans charge ) | km / h | 20/26 | |
vitesse de levage maximale(Charge complète / sans charge ) | mm / s | 330/350 | |
gradabilité maximale(Charge complète / sans charge ) | % | 15/20 | |
Poids de chariot élévateur | kg | 11800 | 12410 |
Modèle de moteur | Quanchai4J1-115C32 |
Contactez-nous
En attente de votre e-mail, Nous vous répondrons à l'intérieur 12 heures avec des informations précieuses dont vous aviez besoin.